Home / Prototype/Manufacture / 3D Printers: Go Pro for Less Dough

3D Printers: Go Pro for Less Dough

By Jamie J. Gooch

Stratasys Mojo 3D printer
Stratasys’ Mojo 3D printer.

Just as the market for consumer and hobbyist 3D printers is heating up, prices of professional-level 3D printers are coming down. Granted, there is a big difference between $500 and $10,000, but pros need to consider more than just the sticker price before purchasing a 3D printer.

To produce 3D printers more affordably, hobbyist 3D printers have to make sacrifices. That might mean you have to assemble the 3D printer, fine tune it before getting acceptable output, use difficult software, wait longer for parts to be printed, and cut, sand and file away support structures to get the final output you want. Those trade-offs may be perfectly acceptable if you are 3D printing as a hobby, but they don’t cut it for most professionals.

“A business-class system is meant to be run hour in and hour out, and is expected to have a long lifecycle,” says Todd Grimm, president of T. A. Grimm & Associates, a rapid prototyping consultation firm. “If you get into business-class technology, whatever you throw at it you should expect to get good output from it. The capabilities in consumer class systems are not quite there.”

Breaking Price Barriers

Grimm was speaking at the unveiling of Mojo, Stratasys’ new professional grade 3D-printing system. When purchased as part of a print pack that includes everything you need to get up and running  —  the printer, material, support material, and support-removal system  —  Mojo sells for $9,900. That’s about $1,000 less than 3D Systems’ ProJet 1000. Stratasys calls Mojo the lowest-priced professional-grade 3D-printing system on the market, but their definition might be different than Asiga’s, a relative newcomer that offers its Freeform Pico 3D printer starting at $6,990. The diminutive Pico has an 8.6-in. footprint and a small envelope (1.57×1.18×2.95 in.) suited to jewelry or small medical parts. By contrast, Mojo has a build size of 5x5x5 in. and the Projet 1000 has a build size of 6.75x8x7 in.

Objet30 Pro 3D printer
The Objet30 Pro.

Beyond the $10,000 mark, users can find more options, such as color 3D printing in the Stratasys uPrint SE Plus, and 3D Systems’ ProJet 1500 and ZPrinter 150. Prices for each are around $15,000.   Blueprinter, a Denmark-based manufacturer, plans to begin competing at this price point as well with its Selective Heat Sintering system that should be available later this year.

Moving up from there is Objet’s Objet24 at $19,900, and Objet30, which can build with five different materials, for $30,000. The company also just announced its Objet30 Pro, which can print with seven materials, including high-temperature and clear   options, for $43,000.

“There are lots of designers and others dying to jump into 3D printing, but products like the Makerbot are not going to meet their needs, and they don’t want to spend $150,000, so they’ve been sitting on the sidelines,” says Objet’s Bruce Bradshaw.

Choices, Choices

Beyond what many would consider “low-cost” are larger build sizes, faster speeds, additional material options and different additive manufacturing technologies. However, even engineers on a budget can get a taste of higher-end systems by using a service provider, such as 3D Systems’ QuickParts or 3Dproparts, Stratasys’ RedEye On Demand, or Solid Concepts’ ZoomRP.com.

There is no shortage of options when it comes to 3D printing and additive manufacturing. When deciding where to invest, begin with outlining your needs. What’s most important to you? Cost, speed, accuracy, build size, color, ease of use, materials? The answer may lead you to a combination of technologies and service providers that can best fit your needs.  

Jamie Gooch is Managing Editor of Desktop Engineering. Send e-mail about this article to DE-Editors@deskeng.com.



About Jamie J. Gooch

Jamie Gooch is the editorial director of Digital Engineering. Contact him at de-editors@digitaleng.news.