Data Translation Announces Low-Cost USB DA Board
Suited for OEMs, the DT9812-10V-OEM ships with a full complement of software.
Latest News
October 2, 2008
By DE Editors
Data Translation (Marlboro, MA) announces an OEM version of its DT9812-10V low-cost USB module, a data acquisition (DA) board. The DT9812-10V-OEM is the newest addition to the company’s ECONseries of low-priced modules and provides two 20-pin connectors to accommodate all I/O signals without an enclosure. This allows the user to embed this low cost board into their own system.
Key design features of the DT9812-10V-OEM ($349) include ultimate flexibility with 8 analog inputs, 2 analog outputs, 16 digital I/O (8 in / 8 out), and one 32-bit counter timer; independent subsystem operation at throughput rates up to 50kHz; signal range of +/- 10V on both the analog input and analog output; generate sine, rectangle, triangle, or DC waveforms with the analog outputs; 12-bit resolution for both the analog input and analog output subsystems; and easy signal connections with two 20-pin connectors for all I/O signals.
The DT9812-10V-OEM ships with a full complement of software. You can develop your software in .NET, Visual Basic, Visual C#, Visual C++, Visual J#, or you can use a DT ready-to-measure applications. Measure Foundry application builder can be used to create powerful test and measurement applications without writing any code.
For a datasheet, contact Data Translation Inc.
Sources: Press materials received from the company and additional information gleaned from the company’s website.
Subscribe to our FREE magazine,
FREE email newsletters or both!Latest News
About the Author
DE EditorsDE’s editors contribute news and new product announcements to Digital Engineering.
Press releases may be sent to them via [email protected].