Home / Engineering Computing / Marsh Bellofram Launches Integrated Alternating Relay and Duplex Controller Series

Marsh Bellofram Launches Integrated Alternating Relay and Duplex Controller Series

By DE Editors

The ATC Diversified Electronics division of Marsh Bellofram Corporation has announced the global market introduction of the ARM Series, a family of alternating relays and duplex controllers, designed to ensure equal runtime of multiple load installations in pump sequencing, level control, lift station, motor protection and other industrial applications.

The Marsh Bellofram ARM Series incorporates a microprocessor-based controller that evenly distributes runtime by automatically alternating designated lead and lag loads between two pump sequences. The series also features an inrush delay, which prevents both loads from energizing simultaneously, thus significantly reducing line sag, while allowing for additional load capacity in the event of excess requirements.  Units include five UL913 low voltage/low current control switch inputs, which are electrically isolated from the control voltage and load alarm contacts. Five LED indicators are included to confirm the functionality of the inputs. Incorporation of hand-of-automatic (H-O-A) switches allow for manual operation as needed. 

Additional features include an integral alarm output, with alarm contacts that close when a control switch fails or system capacity is exceeded; control switch fault detection, which notifies the user of open and shorted control switch failures; and a test-and-clear switch, which verifies device function and resets the control switch fault detection algorithm as needed. The integral device logic of the ARM Series allows for outputs to continue their operation, even if one input fails to open or close. 

For more information, visit Marsh Bellofram Corporation.

Sources: Press materials received from the company and additional information gleaned from the company’s website.

About DE Editors

DE's editors contribute news and new product announcements to Digital Engineering. Press releases can be sent to them via DE-Editors@digitaleng.news.