Home / high performance computing / Demystifying Cluster Deployment with IBM’s Nick Werstiuck

Demystifying Cluster Deployment with IBM’s Nick Werstiuck

A chart showing cost comparison of a self-assembled cluster and a IBM Platform Computing HPC cluster, from the IBM-sponsored whitepaper "5 Easy Steps to a High Performance Cluster."

For many businesses that rely heavily on computer-aided engineering (CAE) and rendering software programs, putting up with workstations that slow down or come to a standstill is part of the frustrating day-to-day reality, according to the results of a survey DE recently ran on behalf of IBM Platform Computing.

Nick Werstiuk, IBM Platform Computing's product executive, discusses common anxieties associated with cluster deployment.

Among more than 1,000 participants, 88% revealed they’re using compute-intensive CAE and visualization applications. At the same time, 39% indicated they’re running them exclusively on workstations. The disparity suggests a large number of these businesses simply accepted the workstations’ sluggishness — or complete inaccessibility, in the worst cases — as a fact of life.

The easiest fix to the productivity hindrance is to offload the workstation-crippling simulation and visualization tasks to a dedicated cluster, equipped with far more computing cores than individual machines typically offer. So why aren’t many businesses doing that? The reluctance to deploy clusters may have to do with the perceived high cost, dedicated IT resources required (both human and hardware), and uncertainty about ease of use. To address these, I spoke with Nick Werstiuk, IBM Platform Computing‘s product line executive.

Based on the survey responses, Werstiuk singled out several factors as the reasons many businesses delay or avoid cluster deployment. He observed, “Many CAE users lack knowledge about clusters as infrastructures to run their applications. Organizations tend to have tight IT budget constraints, so they may just make do with workstations. Finally, a major concern is that they often lack the skill and knowledge to manage these clusters.”

Even if a business decides to bite the bullet and acquire the necessary cluster, it may trim additional cost by choosing open source cluster maintenance software. Werstiuk cautioned, “Open source generally requires [users] to pull together a variety of software, which they must integrate or support on their own. The expertise you need to integrate or pull together these solutions is something you need to consider. ”

A lack of knowledge may also lead some first-time cluster adopters to choose Windows HPC, a cluster management solution closely related to the Windows OS that dominates the engineering software market. Werstiuk noted, “That offers robust support for Windows-based hardware and applications, but not for Linux-based applications. A lot of these CAE applications do have a large Linux footprint. Clients might want to run them on Linux-type environment.”

By comparison, IBM Platform HPC offers both dedicated tech support, a single integrated cluster-management environment, and support for multiple OS, Werstiuk pointed out. “We further simplify the notion of acquiring and using clusters by releasing a set of capabilities around the IBM Application Ready Solutions, which integrates pre-tested IBM hardware with IBM Platform HPC Management software and ISV applications from ANSYS, Accelrys, Schlumberger, and more,” he added.

If you’re looking for insights into the cost of cluster deployment — not just the initial hardware and setup cost but the cost of owning and maintaining it over time — you may use IBM’s online HPC total cost of ownership (TCO) calculator to get some estimates. Even though IBM HPC initially costs more than open-source solutions, the TCO calculator shows that, over time, a cluster from IBM Platform Computing costs significantly less than self-assembled clusters managed with open-source software.

For the IBM Platform Computing-sponsored white paper titled “5 Easy Steps to a High Performance Cluster” based on the survey results, visit the download page here.

For the complete interview with IBM’s Nick Werstiuk, listen to the podcast below:

If you enjoyed this post, make sure you subscribe to my RSS feed!

About Kenneth

Kenneth Wong has been a regular contributor to the CAD industry press since 2000, first an an editor, later as a columnist and freelance writer for various publications. During his nine-year tenure, he has closely followed the migration from 2D to 3D, the growth of PLM (product lifecycle management), and the impact of globalization on manufacturing. His writings have appeared in Cadalyst, Computer Graphics World, and Manufacturing Business Technology, among others.

Leave a Reply

Your email address will not be published. Required fields are marked *