Home / Hardware / CPU / Prelude to GTC 2014: ANSYS to Speed Up Fluid Dynamics with GPUs

Prelude to GTC 2014: ANSYS to Speed Up Fluid Dynamics with GPUs

ANSYS announces NVIDIA GPU acceleration for its fluid dynamics solver in ANSYS Fluent.

Just a month ahead of NVIDIA GPU Technology Conference 2014 (GTC 2014, March 24-27, San Jose, California), simulation software maker ANSYS is announcing its computational fluid dynamics (CFD) solver can run significantly faster if you augment the CPU with NVIDIA GPUs.

Since compute-intensive simulation programs tend to test the limit of CPUs, software vendors like ANSYS seek to speed up the number-crunching by refining their solver codes to take advantage of the GPU’s parallel processing power. In 2013, ANSYS made it possible to improve the performance of ANSYS Mechanical — designed to test and simulate mechanical behaviors — using NVIDIA GPUs.

According to Ray Browell, ANSYS’ lead product manager, “Models as large as 12M degrees of freedom can be accelerated with a single K40 [GPU] and provide 2X performance gains over just CPUs [on ANSYS Mechanical 15.0]. Today’s announcement indicates those who use ANSYS Fluent — designed for simulating fluid and air flow — can now employ the GPU to accelerate their operations in a similar fashion.

David Cusano, chief technology officer and vice president of Parametric Solutions Inc., an ANSYS customer specializing in gas turbine design, observed, “By adding NVIDIA GPU accelerators, our engineers cut the time for typical ANSYS Mechanical models in half, doubled the performance of maxed out CPU systems and often saved an entire day’s worth of work. Now, with support for GPU acceleration in ANSYS Fluent 15.0, complex CFD simulations can be accelerated in a similar fashion, especially when paired with new, higher performance NVIDIA Tesla K40 GPU accelerators.”

Under typical high performance computing (HPC) cluster licensing, adding additional CPU cores to speed up complex simulation jobs usually requires additional licensing fees. However, in the case of ANSYS, the GPU-acceleration may come at little or no added cost (except, of course, the cost of the GPUs that must be acquired).

According to Barbara Hutchings, ANSYS’ director of strategic partnerships, “ANSYS customers get access to the entire GPU socket via the interchangeable GPU socket vs. CPU core licensing. Customers don’t need to make a separate purchase decision. GPUs are enabled by the full range of ANSYS HPC products.”

If you enjoyed this post, make sure you subscribe to my RSS feed!

About Kenneth

Kenneth Wong has been a regular contributor to the CAD industry press since 2000, first an an editor, later as a columnist and freelance writer for various publications. During his nine-year tenure, he has closely followed the migration from 2D to 3D, the growth of PLM (product lifecycle management), and the impact of globalization on manufacturing. His writings have appeared in Cadalyst, Computer Graphics World, and Manufacturing Business Technology, among others.

Leave a Reply

Your email address will not be published. Required fields are marked *