Home / 3D Printing / Getting to Know You: What the 2017 DE Reader Survey Reveals

Getting to Know You: What the 2017 DE Reader Survey Reveals

Welcome to 2018, Dear Readers!

Recently, with the help of Peerless Research Group, a division of DE‘s parent company Peerless Media, we completed a reader survey. The results confirm some of our own suspicions, prove many of our editorial strategies to be on the right path, but also surprise us in some ways.

According to Deloitte, “Women constitute one of U.S. manufacturing’s largest pools of untapped talent. Women totaled about 47% of the U.S. labor force in 2016, but only 29% of the manufacturing workforce.”

The imbalance, as it turns out, is much more dramatic among DE readers — or in the survey respondent pool, at any rate: 98% of the respondents were men; only 2% were women. It’s something we hope to address by seeking out and highlighting the roll of women in the engineering and design fields.

In DE‘s survey pool, 25% of the readers are ages 45-54; 37% are 55-64; 22% are 65 or older. That mans 84% of the readers are 45 or older. Those between 25-44 account for only 15%. And those under 25 account for but only 1%.

The aging workforce in manufacturing — sometimes called the graying of manufacturing — became a concern in the last decade. The Manufacturing Institute pointed out, “In 2000, the median age of the manufacturing workforce — at 40.5 — was 1.1 years above the median age of the total non-farm workforce. By 2012, this gap doubled, with the median age in manufacturing being 44.7 years versus 42.3 years for the total non-farm workforce.”

The Society for Human Resource Management’s report titled “Preparing for an Aging Workforce: Manufacturing Industry Report” revealed 27% of the manufacturing firms’ workforce is 55 or older.

DE readers’ personal involvement in the product planning phases (click to see larger image).

DE readers’ personal involvement in the design process (click to see larger image).

DE readers would like to see more content in some areas (click to see larger image).

Describing their personal involvement in the product planning phases, 78% of DE readers reported they’re involved in concept development, 70% in the vendor/supplier evaluation, and 55% in fabrication. In the design process, 65% of the readers reported they’re personally involved in vendor/supplier evaluation, 65% in feasibility study and trade-off analysis, and 68% in modeling and simulation.

Describing how they access DE, 37% said they do and would access the content from mobile devices like iPhones.

When asked to rate the level of coverage for different topics, 36% said they’d like to see more content on 3D printing, and 34% on 3D scanning. Additionally, 38% said they’d like to read more about CAD, 27% about software engineering and programming, 26% about FEA and simulation, and 23% about IoT.

When asked, what is not covered in DE that they’d like to see included, quite a few respondents wrote “machine learning” and “artificial intelligence.” Also on that list are “robotics,” “medical devices,” and “open source software.”

Asked to state “the thing I like most about DE,” some wrote “the articles,” “the information,” and “the big logo.”

Curiously, on “the thing I would like to change most about DE,” someone also wrote, “the logo.”

If you enjoyed this post, make sure you subscribe to my RSS feed!

About Kenneth

Kenneth Wong has been a regular contributor to the CAD industry press since 2000, first an an editor, later as a columnist and freelance writer for various publications. During his nine-year tenure, he has closely followed the migration from 2D to 3D, the growth of PLM (product lifecycle management), and the impact of globalization on manufacturing. His writings have appeared in Cadalyst, Computer Graphics World, and Manufacturing Business Technology, among others.

Leave a Reply

Your email address will not be published. Required fields are marked *

*